LDP Low Headroom Overhead Crane

1t-20t

Lifting capacity

7.5m-22.5m

Span

6-30m

Lifting height

A3-A5

Working class

Brief Introduction

LDP Low Headroom Overhead Crane

● Lifting Capacity: 1t-20 ton

● Span: 7.5-22.5

● Lifting Height: 6-30 meters

● Working Duty: A3-A5（FEM 1Am-2m）

● Lifting Speed:8m/min or 8/0.8m/min;10t:7/0.7/min

● Working Temperature: -20°C to +40°C (-40°C optional)

● Application: Workshops, warehouses, plants with low roof clearance

A LDP Low headroom Overhead Crane is a light-duty lifting solution, especially designed for workshops with limited vertical space.its side-mounted hoist design maximizes lifting height while reducing building height requirements and overall construction costs. With a compact structure, smooth operation, and reliable performance, this crane is well-suited for a wide range of industrial applications. It is an excellent choice for factories, warehouses, logistic center and other facilities that need efficient material-handing within restricted headroom conditions.

Technical Parameters

Lifting capacity	The lifting capacity of the LDP type single-girder overhead crane isgenerally 1-16 tons, and higher tonnages can be customized.
Span	The distance between the centerlines of the crane's main trolley rails is usually 7.5m-22.5m. The standard span series includes 7.5m, 9m, 10.5m, 12m, 13.5m, 15m, 16.5m, 18m, 19.5m, 21m, 22.5m, etc. Users can determine the appropriate span according to the actual size of the workshop and usage requirements, and non-standard customization is supported.
Lifting height	The vertical distance from the lowest position to the highest position of the hook. Thecommon lifting height is 6-30 meters (the standard ones are 6/9/12/18/24/30 meters). It has an effective height increased by 0.5-2 meters compared with the LD type.
Working class	A3-A5 (medium frequency of use), suitable for frequent operations.
Running speed	20/30 m/min (for the main trolley), and frequency conversion speed regulation can be equipped.
Control mode	Handle/remote control/cab, which can be selected as needed.
Voltage	Non-standard customization is available

LOW HEADROOM OVERHEAD CRANT PARTS

Building saving: The main saving comes from the ability to use a smaller building or low headroom workshop, which directly reduces construction cost.
Maximized space utilization: These cranes are designed to make the most efficient use of the limited headroom, especially used in workshop, warehouses, and other industrial settings.
Efficient design: The crane's design positions the hoist close to the main beam, effectively minimizing vertical space.
Increased storage capacity: By getting closer to the ceiling, the crane increases the usable vertical lifting and storage height, improving overall efficiency.

Product advantages

Low headroom design to increase effective lifting height

The limit position of the hook is closer to the roof. Compared with the ordinary LD type crane, it canincrease the lifting height by 0.5-2 meters, making it especially suitable for low factory buildings.
Compact structure to save space
Stable operation and flexible control

Frequency conversion control (optional) is adopted to realize smooth start-up, precise positioning andreduceload (sway).
It supports ground handle operation or wireless remote control to meet the needs of different workingconditions.
Safe and reliable

It is standard equipped with safety devices such as overload protection, limit switches and emergencybraking, and complies with national standards (GB/T 3811). lt operates with low noise, making it suitablefor places with high requirements for the working environment.
Economical and practical